Samsung Galaxy S7 Edge: How to Enable and Use Location Tags Feature in Camera App in Android 6.0.1 Marshmallow

If needed, you can enable the location tags feature in the Camera app to have your Samsung Galaxy S7 Edge attaches geographical location data into your photos or videos so you can use this info to easily know about where they were taken or recorded. However, since photos or videos with location tags contain with location information, make sure you use caution when sending, sharing, distributing, or copying those photos or videos.


How to enable the location tags feature in the Camera app?
Assuming that you have an Internet connection(Wi-Fi or mobile data connection) and the location service is enabled, you can turn on the location tags feature by using the following steps:
  1. Open the Camera app.
  2. Tap to view more detailed settings.
  3. If the location tags feature is off, tap the ON/OFF switch next to Location tags to turn it on.
  4. A pop up window appears to let you know some information about the location tags feature. Tap OK to continue enabling this feature.
  5. The location tags feature has been enabled.


How to use the location tags feature in the Camera app?
As the example, we'll use this feature to embed a GPS location tag info into a picture taken with the auto mode by using the following steps:
  1. Open the Camera app. By default, it uses the rear camera with the auto mode.
  2. Point the camera to the object.
  3. If needed, you can manually change the focus by tapping anywhere on the screen where the camera should focus.
  4. Tap to take a picture.
  5. Tap the preview thumbnail to open the picture you have just taken in the Gallery app.
  6. Tap More at the top right and then select Details.
  7. The location info where you took the photo will be listed in the Location section.

Samsung Galaxy S7 Edge: How to Change Video Size in Camera App in Android 6.0.1 Marshmallow

The Camera app in Samsung Galaxy S7 Edge lets you change the size of videos recorded with the rear camera from VGA up to UHD and those recorded with the front camera from VGA to QHD. You can set the size to a higher resolution if you'd like to have a video with a higher quality, or to a lower resolution if your storage is low and you don't want those videos quickly drain your storage.


How to change the video size when using the rear camera in the Camera app?
You can do so by using the following steps:
  1. Open the Camera app. By default, it uses the rear camera.
  2. Tap to view the detailed settings of the rear camera.
  3. Tap Video size (rear) and then select the required size you want to use. There 7 options available:
    • UHD (3840x2160) .
    • QHD (2560X1440)
    • FHD(60fps) (1920x1080)
    • FHD (1920x1080)
    • 1:1 (1440x1440)
    • HD (1280x720)
    • VGA (640x480)
  4. The video size of the rear camera has been changed.

Please note that some features may be unavailable in certain resolution, such as:
  • HDR(rich tone), video effects, and tracking AF features will be unavailable while recording in UHD,QHD,FHD(60fps) resolutions
  • Take pictures while recording feature will be unavailable while recording in FHD(60fps) resolution. 
  • Video stabilisation feature will be unavailable while recording in UHD,1:1,VGA resolution because these resolutions support optical image stabilisation only.


How to change the video size when using the front camera in the Camera app?
You can do so by using the following steps:
  1. Open the Camera app. By default, it uses the rear camera.
  2. Tap to switch the camera from the rear to the front.
  3. Tap to view the detailed settings of the front camera.
  4. Tap Video size (front) and then select the required size you want to use. There are 5 options available:
    • QHD (2560X1440)
    • FHD (1920x1080)
    • 1:1 (1440x1440)
    • HD (1280x720)
    • VGA (640x480)
  5. The video size of the front camera has been changed.

Please note that some features may be unavailable in certain resolution, such as:
  • HDR(rich tone) and video effects features will be unavailable while recording in QHD resolution.
  • Video stabilisation will be unavailable while recording in QHD,1:1,VGA resolution because these resolutions support optical image stabilisation only.

Samsung Galaxy S7 Edge: How to Change Picture Size in Camera App in Android 6.0.1 Marshmallow

If needed, you can change the size of pictures taken with the rear camera in your Samsung Galaxy S7 Edge from 3.7MP up to 12MP and those taken with the front camera from 3.7MP up to 5.0MP. You can adjust the size to a higher resolution if you'd like to have pictures with a higher quality, or to a lower resolution if you'd like to have pictures with a smaller size so you can easily share it to others via email, messages, etc., as well as to help you avoid low storage issue especially if you're the one who like to capture almost every single moment in your life into photos.


How to change picture size when using the rear camera in the Camera app?
You can do so by using the following steps:
  1. Open the Camera app. By default, it uses the rear camera.
  2. Tap the picture size icon next to the settings icon at the top of the screen and then select the required size you want to use. There are 6 options available:
    • 4:3(12M) 4032x3024
    • 4:3(6.2M) 2880x2160
    • 16:9(9.1M) 4032x2268
    • 16:9(3.7M) 2560X1440
    • 1:1(9.1M) 3024x3024
    • 1:1(4.7M) 2160x2160
  3. The picture size of the rear camera has been changed. As the example, if you set the size to 4:3(6.2M), the width of the image taken with the rear camera will be 2880 pixels and the height of the image will be 2160 pixels.


How to change picture size when using the front camera in the Camera app?
You can do so by using the following steps:
  1. Open the Camera app. By default, it uses the rear camera.
  2. Tap to switch the camera from the rear to the front.
  3. Tap the picture size icon next to the settings icon at the top of the screen and then select the required size you want to use. There are 3 options available:
    • 4:3(5.0M) 2592x1944
    • 16:9(3.8M) 2592x1458
    • 1:1(3.7M) 1936x1936
  4. The picture size of the front camera has been changed. As the example, if you set the size to 4:3(5.0M), the width of the image taken with the front camera will be 2592 pixels and the height of the image will be 1944 pixels.

Samsung Galaxy S7 Edge: How to Fix Flipped or Mirrored Selfies in Android 6.0.1 Marshmallow

Auto-flip selfie is a feature in the Camera app in Samsung Galaxy S7 Edge that can be used to set your phone to automatically save self-portrait photos taken with the front camera as you see in the preview screen or flip horizontally so that the right side in the original scene will be the left side in the photo or vice versa. However, if you don't like your selfies to be flipped automatically, you can fix it by disabling the auto-flip selfie feature so all your selfies will be saved as its original scene.


How to disable the auto-flip selfie feature in the Camera app?
You can turn off this feature by using the following steps:
  1. Open the Camera app. By default, it uses the rear camera.
  2. Tap switch the camera from the rear to the front.
  3. Tap to view detailed settings for the front camera.
  4. Tap the ON/OFF switch next to Save pictures as previewed to enable or disable it. When the switch turns , means the auto-flip selfie feature is disabled and your phone won't save your self-portrait photos as flipped or mirrored images.

Samsung Galaxy S7 Edge: How to Set SD Card as Default Storage in Camera App in Android 6.0.1 Marshmallow

By default, the storage location in the Camera app in Samsung Galaxy S7 Edge is set to device storage. However, you can set the SD card you have inserted into your phone as the default storage so that all pictures you have taken and videos you have recorded will be saved there. This will help you to avoid low device storage which can bring you some problems, moreover if you're the one who like to capture almost every single moment in your life into photos or videos.


How to set SD card as the default storage in the Camera app?
You can do so by using the following steps:
  1. Open the Camera app.
  2. Tap to view more detailed settings.
  3. Scroll down the screen, tap Storage location and then select SD card.
  4. The default storage in the Camera app has been set to the SD card.

Samsung Galaxy S7 Edge: How to Enable and Use Review Pictures Feature in Camera App in Android 6.0.1 Marshmallow

If you often use your Samsung Galaxy S7 Edge to take pictures, you can enable the review pictures feature in the Camera app to have your phone provides you a preview of the pictures immediately after you take them so you can easily review it and then do the required actions, such as delete or share the picture. This will save you more time because you don't have to back and forth from the Camera app to the Gallery app each time you want to review your pictures.


How to enable or disable the review pictures feature in the Camera app?
You can turn on or off this feature by using the following steps:
  1. Open the Camera app.
  2. Tap to open the detailed settings.
  3. Scroll down the screen and then tap the ON/OFF switch next to Review pictures to enable or disable it. When the switch turns , means the review pictures feature is enabled and your phone will give you a preview of the pictures immediately after you take them.


How to use the review pictures feature in the Camera app?
As the example, we'll use this feature when taking a picture with the auto mode by using the following steps:
  1. Open the Camera app. By default, it uses the rear camera with the auto mode.
  2. Point the camera to the object.
  3. If needed, you can manually change the focus by tapping anywhere on the screen where the camera should focus.
  4. Tap to take a picture.
  5. A preview of the picture appears in pop-up to let you review it immediately after you take it. Here you can do the following actions:
    • Share the picture: If you'd like to immediately share the picture with your friend or family after you take it, tap Share in pop-up and then select the required share method you want to use with. Follow the on-screen instructions to complete the process.
    • Delete the picture: If you're not satisfied with the picture, you can immediately delete it so it won't take any space in your storage by tapping Delete in pop-up.
    • View the picture in Gallery app: You can tap the preview to view the picture in the Gallery app so you can take another actions for the picture, e.g., edit the picture, set the picture as wallpaper, etc.

Samsung Galaxy S7 Edge: How to Enable and Use Tracking AF Feature in Camera App in Android 6.0.1 Marshmallow

Tracking AF is a feature in the Camera app in Samsung Galaxy S7 Edge that will let you set the camera to track and automatically focus on the object you have selected on the preview screen. You can use this feature when you want to easily take a picture of a moving object because the camera will automatically track and focus on the selected object even when it's moving, or when you want to take a picture of the same object in different positions or angles without you have to manually set the focus each time you or your phone is moving.


How to enable or disable the tracking AF feature in the Camera app?
You can turn on or off this feature by using the following steps:
  1. Open the Camera app.
  2. Tap  to open the detailed settings.
  3. Tap the ON/OFF switch next to Tracking AF to enable or disable it. When the switch turns , means the tracking AF feature is enabled and the camera in your phone will be able to focus on and track a subject that you have selected on the preview screen.


Before using the tracking AF feature to take a picture, you have to remember that the camera may fail when tracking an object in the following conditions:
  • The object is too big or small.
  • The object moves or the camera shakes excessively.
  • The object is in the low-light environment.
  • The object and the background have the same colours or patterns.


How to use the tracking AF feature in the Camera app?
As the example, we'll use this feature while taking a picture of a moving object with the auto mode by using the following steps:
  1. Open the Camera app. By default, it uses the rear camera with the auto mode.
  2. Point the camera to the object.
  3. Tap the object on the preview screen you want to track and auto focus on. When the object is moving, the camera will automatically track and auto focus on it.
  4. Tap to take a photo.
    FYI, if you have difficulty when taking a picture using the on-screen icon, you can say the predefined voice command or press the Volume key as the alternative way to do so.
  5. Tap the preview thumbnail to view the photo you have just taken in the Gallery app.

Samsung Galaxy S7 Edge: How to Enable and Use Motion Photo Feature in Camera App in Android 6.0.1 Marshmallow

Motion photo is a feature in the Camera app in Samsung Galaxy S7 Edge that will let you set your phone to record a short video clip of what happens before the picture is taken. If needed, you can control the playback so you can capture a moment within the playback you might have missed or capture the clearest moment within the playback when you're not satisfied with the picture of a moving object you have taken. When it comes to share, you can select to share the motion photo as an image file or a video file.


How to enable or disable the motion photo feature in the Camera app?
You can turn on or off this feature by using the following steps:
  1. Open the Camera app.
  2. Tap  to open the detailed settings.
  3. Tap the ON/OFF switch next to Motion photo to enable or disable it. When the switch turns , means the motion photo feature is enabled and your phone will record a short video clip of what happens for a few seconds before each picture is taken.


How to use the motion photo feature in the Camera app?
As the example, we'll take a motion photo with the auto mode by using the following steps:
  1. Open the Camera app. By default it uses the rear camera with auto mode.
  2. Point the camera to the object.
  3. If needed, you can manually change the focus by tapping anywhere on the screen where the camera should focus.
  4. Tap to take a picture.
    FYI, if you have difficulty when taking a picture using the on-screen icon, you can say the predefined voice command or press the Volume key as the alternative way to do so.
  5. Tap the preview thumbnail to view the picture you have just taken in the Gallery app.
  6. Tap the motion photo icon to play the video.
  7. If needed, while the video is being played, tap the screen to pause the playback. Tap to resume the playback, or tap Capture to take a screenshot of the paused playback displayed on the screen.
  8. If needed, you can share the motion photo to your friend or family with these steps:
    • While you're viewing the motion photo, tap Share.
    • Select Image file to share only the picture without the video, or select Video file to share only the video.
    • Select the required share method you want to use with and then follow the on-screen instructions to complete the process.